REPTOPIA D1 Smart Reptile Enclosure – Black Complete Kit
AED 1,890 Includes 5% VAT AED 1,800 excl. VAT
Delivery & pickup
- UAE delivery only. In-store pickup available.
- Delivery fees are shown at checkout based on your address.
- Large aquariums & cabinets: contact us before ordering to confirm delivery availability, charges, floor/lift access and handling.
The REPTOPIA D1 Smart Reptile Enclosure – Black Complete Kit brings separate floor and air heating, UVA/UVB lighting and automatic misting into one compact terrarium. The black ABS frame and ultra-clear tempered glass create a clean display, while the integrated control panel keeps everyday temperature and timer settings together. Product dimensions are 500 × 350 × 400 mm.
Separate control for floor and air heating
The D1 combines a preinstalled 16 W PTC heating pad in the base with a 100 W UVA heating module above. Bottom and top temperature probes support separate control of the two heating zones. Adjust the UVA temperature setting from 20–40°C in 1°C increments to suit your planned setup. The PTC pad includes upper-temperature protection, supported by the bottom probe.
Timed lighting and automatic misting
The 8 W UVB module has separately adjustable start and stop times in 1-hour steps. The 5 W misting module uses two nozzles and an approximately 500 mL reservoir, with three selectable misting levels and an adjustable start time. Its magnetic mounting and contact-pin connection simplify installation.
A separate 10 W ambient LED offers eight colors: red, orange, yellow, green, cyan, blue, purple and white. A USB power port and storage compartment keep useful functions close to hand. The one-piece, water-resistant base makes routine cleaning easier.
What is included in this complete kit?
- REPTOPIA D1 enclosure in black, with integrated display and control panel.
- Preinstalled bottom heating pad and dual-zone temperature control.
- Top UVA heating module and UVB lighting module.
- Automatic misting module with dual nozzles and reservoir.
- 8-color ambient lighting, USB power port and storage compartment.
This listing is the black complete equipment configuration, including the UVA, UVB and misting modules. Plants, substrate, branches and animals in the lifestyle images illustrate possible setups and are not included in this equipment list.
Technical specifications
| Brand / model | REPTOPIA D1 |
|---|---|
| Configuration | Black Complete Kit |
| SKU / barcode | A005082 |
| Product dimensions (L × W × H) | 500 × 350 × 400 mm |
| Construction | ABS housing, ultra-clear tempered glass and a one-piece base |
| Bottom heating | 16 W PTC heating pad, preinstalled; bottom temperature probe |
| Top heating | 100 W UVA heating module; top temperature probe |
| UVA temperature setting | 20–40°C, adjustable in 1°C increments |
| UVB lighting | 8 W module; start and stop times adjustable in 1-hour increments |
| Misting module | 5 W; dual nozzles; magnetic mounting and contact-pin connection |
| Misting reservoir | Approximately 500 mL |
| Misting settings | 3 levels; start time adjustable in 1-hour increments |
| Ambient lighting | 10 W LED; 8 selectable colors |
| Additional features | Integrated display and controls, USB power port and storage compartment |
| Rated voltage | 220 V |
| Rated power | 200 W |
The 200 W figure is the enclosure rating shown on the packaging. Individual module wattages are listed separately above.
Getting started
- Install the included UVA and UVB modules in their matching top connections and secure them as shown in the supplied instructions. Fit the misting module using its magnetic mounting and contact pins.
- Set the clock, then configure the floor heating, UVA temperature, UVB lighting period and misting level/start time on the control panel.
- Prepare the enclosure with appropriate substrate, hides and other furnishings for your intended animal. Check actual conditions with an independent thermometer before use.
- After a power interruption, check the clock and all control settings and reset any values that differ from your intended program.
Frequently asked questions
Does dual-zone control mean automatic cooling?
The documented system controls the bottom heating pad and top UVA heater separately. The 20–40°C figure is the UVA temperature-setting range; it is not a cooling specification or a recommended temperature for every reptile.
How is misting adjusted?
Select one of three misting levels and set the start time in 1-hour increments. These are misting controls; the supplied specifications do not state a target-humidity setting.
How do I choose the right setup?
Match the enclosure dimensions, heating, lighting and misting to the animal's adult size and species-specific needs. Confirm suitable UVB output, lamp placement and daily lighting duration for your setup; the module's 8 W rating alone does not specify its UVB strength.
Choose your D1 finish
Also available as the REPTOPIA D1 white complete kit. Explore our reptile tanks and terrariums, or contact YoloLife in Dubai and quote A005082 for help checking this configuration.
